How do I run jobs on a GCC Spirit using a USB FlashDrive using external drive or without a PC?
Visit Chapter 4.1.3 of the GCC Spirit Users Manual (Click Here) for complete information, below is a sample of the data. 
4.1.3 USB Storage Setup
GCC laser engraver is built-in with USB storage port allow you to transmit data from USB flash drive.You can format and use a USB flash drive as an USB storageof GCC laser engraver.
USB flash drive minimum requirements
Windows FAT16/FAT32 file system format
A maximum of 32G of storage capacity
|
Following are our certified brandsfor GCC LaserPro USB storage Brand |
Size |
Format |
|
HP |
16G |
FAT32 |
|
16G |
||
|
PNY |
8G |
|
|
Kingston |
8G/16G |
|
|
Transcend |
4G/16G |
|
|
ADATA |
8G/32G |
Step 1. Make sure the page setup and orientation is match GCC LaserPro Spirit / Spirit LS / Spirit GLS Hybrid. Please refer to Chapter 5.2.1for page setup and orientation.
Step 2. Open the file in graphics software and click File Print from menu bar, and the Print window will appear
Step 3. From the navigation bar Printer. Click Spirit / Spirit LS / Spirit GLS Hybrid.
NOTE: SanDisk (Click Here for Amazon Product)