Application of CerMark Ultra Paste Product
Application of CerMark Ultra Paste
How to apply CerMark Ultra Paste
CerMark ULTRA is specifically formulated to laser mark on most laser markable substrates such as metals, glass, ceramics (glazed or
unglazed), stone, brick (glazed & unglazed), slate and more using just one CerMark product. This new product is by far superior to
our existing product line formulated to achieve the best results in the industry.
CerMark ULTRA is ethanol based which allows for a faster drying time.
Using CerMark ULTRA:
Strengths of Product
Allows CO2, YAG, and Fiber lasers to mark the follow substrates: Uncoated metals such as stainless, brass, aluminum and more
as well as ceramics, glass, porcelain, brick and more. Produces high contrasting, highly durable marks; fast drying; will not
stain sensitive metals such as brass, nickel and others.
Recommended Application Parameters
Application Methods Spray gun, airbrush, or aerosol.
Application Clean the surface to be marked so that it is free of any
lubricants or oils. The ULTRA must be applied with an
even coat to ensure a consistent mark and color.
Coverage 500 grams of the CerMark ULTRA will cover approximately
6000 square inches.
Thin with ethanol.
Recommended reduction 1:1 ratio by volume: 1 part ULTRA – 1 part ethanol
Thinner
Suggested Cleaning: Wash with water or a wet towel or sponge.